Retired Faculty

Personal Data

Ming-Horng-Lin
mhlin@nkust.edu.tw
Ming-Horng-Lin

Retired Faculty

Retired Faculty-Materials and Energy
Professor
School YearPaper Title
98,Effect of plasma energy on enhancing biocompatibility and hemocompatibility of diamond-like carbon film with various titanium concentrations,Journal of Alloys and Compounds,477,(SCI)
97,Electrical discharge machining of a NiAlFe ternary shape memory alloy,J. of Alloys and Compounds,----,(SCI)
97,Chang-Chih Chen, Keng-Liang Ou, Effect of electro-discharging on formation of biocompatible layer on implant surface,J. of Alloys and Compounds,----,(SCI)
97,The Characteristics of cutting pipe mechanism with multi-electrodes in EDM,J. of Materials Processing Technology,----,(SCI)
96,Electrical discharge machining of TiNiCr and TiNiZr ternary shape memory alloys,Mater. Sci. & Eng.,----,(SCI)
96,Electrical discharge machining of a NiAlFe ternary shape memory alloy,J. of Alloys and Compounds,----,(SCI)
96,Chang-Chih Chen, Keng-Liang Ou, Effect of electro-discharging on formation of biocompatible layer on implant surface,J. of Alloys and Compounds,----,(SCI)
96,The Characteristics of cutting pipe mechanism with multi-electrodes in EDM,J. of Materials Processing Technology,----,(SCI)
95,Research of microstructure and biocompatible properties on Fe-Al-Mn alloy with recast layer by electro-discharge machining,Journal of Chinese Society of Mechanical Engineers,27,(SSCI)
93,Superlattice reflections in hot-pressed Pb(Mg1/3Nb2/3)O3 ceramics,Mater. Sci. & Eng. A,1,(SCI)
93,Effect of phase formation behavior on thermal stability of hafuium based thin film for copper interconnects,Jpn J. Appl. Phys.,1,(SCI)
93,High Cu Diffusion Resistance in Ultrathin Multi-quasi-amorphous CVD-Ti/TiNx Films,J. Electrochem Soc.,1,(SCI)
93,Nanostructured TaN(O)/TaN Barrier Film Formed by Plasma Treatment for Cu Interconnect,Electrochemical and Solid-State Letters,1,(SCI)
93,Acicular Mullite Crystals in Vitrified Kaolin,J. Am. Ceram. Soc.,1,(SCI)
93,Effect of hydrogen plasma treatment on the electrical properties of sputtered N-doped cuprous oxide films,Thin Solid Films,1
93,Barrier capability of Hf-N films with various nitrogen concentrations against copper diffusion in Cu/Hf-N/n+-p junction diodes,J. Electrochem Soc.,1,(SCI)
93,Comparative study of polycrystalline Ti, amorphous Ti and multi-amorphous Ti as a barrier film for Cu Interconnect,J. Vac. Sci. & Tech. B,1
93,Charge compensation mechanism in yttria-doped barium titanate,Ceram. Inter.,1
93,Synthesis of nanocrystalline tungsten carbide by electrical discharge machining,Ceram. Inter.,1,(SCI)
91,Densifucation retardation in the sintering of La2O3-doped barium titanate ceramics,Mater. Sci. & Eng. A,1,(SCI)
91,Collinear partial dislocation in barium titanate perovskite,,Mater. Sci. & Eng. A,1,(SCI)
91,Hexabarium 17-titanate in pressureless-sintered TiO2-excess barium titanate,,Acta mater.,1,(SCI)
91,Site-occupancy yttrium in BaO-excess BaTiO3,Mater. Sci. & Eng. A,1,(SCI)
91,Crystallographic faceting in sintered barium titanate perovskite,J. Am. Ceram. Soc.,1,(SCI)
91,Dislocation substructures in CO2-laser-sintered barium titanate,,phys. Stat. Sol. (a),1
91,Origin of superlatttice reflections in Pb(Fe2/3W1/3)O3,J. Am. Ceram. Soc.,1,(SCI)
School YearPaper Title
100,氣體放電加工法與添加碳粉之表面改質研究,"第二十八屆中國機械工程全國學術研討會,2011-12-2011-12,(Other)
100,機械合金法製備Mg-Ti及Mg-Al合金之氫化特性研究,"第二十八屆中國機械工程全國學術研討會,2011-12-2011-12,(Other)
100,三元系TiNiX(X=Zr,Cr)形狀記憶合金雷射加工特性之研究,"第二十八屆中國機械工程全國學術研討會,2011-12-2011-12,(Other)
100,鈦鎳鉻記憶型合金熱機處理之研究,"第二十八屆中國機械工程全國學術研討會,2011-12-2011-12,(Other)
99,機械合金法製備鎂鎳鐵系儲氫合金氫化特性之研究,Materials Research Society-Taiwan Annual Meeting,2010-11-2010-11,(Other)
99,Ti50Ni49.5Cr0.5 形狀記憶合金氣體滲氮之研究,Abstracts of the 26th National Conference on Mechanical Engineering,2010-11-2010-11,(Other)
99,微電流放電加工法之人工牙根表面改質與製作,Abstracts of the 26th National Conference on Mechanical Engineering,2010-11-2010-11,(Other)
99,以機械化學法合成與改進奈米級氫氧基磷灰石之特性,2010 Annual Meeting of Chemical Society Located in Taipei,2010-12-2010-12,(Other)
98,不同加工液對鈦合金之放電表面性質分析,2009, Proceeding of 26th National Conference on Mechanical Engineering The Chinese Society of Mechanical Engineers,2009-11-2009-11,(Other)
98,粉末燒結法製備Mg2-xMxNi(M=Mg、Ti、Co；X=0.25) (M=Mg、Ti、Co;X=0.25)儲氫合金粉末,,2009, Proceeding of 26th National Conference on Mechanical Engineering The Chinese Society of Mechanical Engineers,2009-11-2009-11,(Other)
98,Ti50Ni49.5Cr0.5 形狀記憶合金熱機處理之研究,2009, The 26th National Conference on Mechanical Engineering,2009-11-2009-11,(Other)
98,A study of TiNiCr ternary shape memory alloys,The 26th National Conference on Mechanical Engineering,2009-11-2009-11,(Other)
95,The study of Cu-based bulk amorphous alloys prepared by copper mold casting,Conference of Precision Machinery and Manufacturing Technology,2006-05-2006-05,(Other)
95,Hemocompatibility valuation of Cu-based bulk amorphous alloys prepared by copper mold casting,Conference of The Chinese Society for Materials Science,2006-11-2006-11,(Other)
95,Research of microstructure and biocompatible properties on Fe-Al-Mn alloy with recast layer by electro-discharge machining,5th International Conference of SME,2006-11-2006-11,(Other)
95,Electrical discharge machining of NiAlFe ternary shape memory alloys,23屆機械工程研討會,2006-11-2006-11,(Other)
93,Electrical and microstructure properties of N-doped cuprous oxide films by co-sputtering method,2004 Fifth International Conference On Microelectronics And Interfaces,2004-03-2004-03,(Other)
92,多電極切桿機構之特性研究,20th. Nat. Conf. On Mech. Eng.,2003-06-2003-06,(Other)
92,以放電加工法合成奈米碳化鎢粉體,Proc. Chinese Mater. Sci. Soc,2003-06-2003-06,(Other)
91,The effect of annealing on properties and microstructure of diffusion barrier layer in Cu-based metallization,中華民國鍍膜科技研討會,2002-06-2002-06,(Other)
School YearProject NameParticipant計畫期間Cooperation
2010氣體放電加工附加粉末之鈦金屬表面改質研究2011-08~2012-07
2011氣體放電加工與附加TiC粉末之碳化鎢刀具表面改質研究2011-08~2012-07
2011HVOF高速火焰熱噴塗WC-Co塗層之磨耗機制與相變化研究2011-08~2012-07
2011材料熱處理檢測服務2011-01~2011-12
2010擠型及複合擠型擠製耐磨光電製程元件、生醫植體元件及再生能源元件之陶瓷材料(I)2010-08~2011-07
2009鋁合金槽車之專用機台組裝與自動焊接設備開發之關鍵技術診斷2009-06~2009-11
2009非傳統正圓形薄形端板加工缺陷或形狀缺陷分析2008-11~2009-02
2008光電製程設備架構件與光電元件高溫模具及零件用節能型T0A1介金屬合金之製備與表面處理2008-08~2009-07
2008以放電加工法改善人工牙根植體表面性質與人工牙根製作評估2008-08~2009-07
2007車用電子系統之0201尺寸薄膜被動元件開發2007-08~2008-07
2006溶-凝膠法旋鍍PZT壓電薄膜於微型圓盤式壓馬達之應用(II)2006-08~2007-07
2005溶-凝膠法旋鍍PZT壓電薄膜於微型圓盤式壓電馬達之應用(I)2005-08~2006-07
2004以放電加工對鈦金屬人工植體表面改質之研究2004-08~2005-07
2003含金屬類鑽膜鍍於機械軸封之研究2003-08~2004-07
2003厚膜電阻與陶瓷基板之微結構分析2003-02~2003-11
2002以放電加工法研製超微細碳化鎢粉體2002-08~2003-07
2002PZT薄膜成長與微結構研究2002-02~2002-11
YearAward NameAward Unit
2012中華民國大專院校101年度教職員工網球錦標賽中華民國大專院校體育總會
School NameCountryDepartmentDegree起迄年月
NSYSUR.O.C.Institute of Materials Sciencep.h.D0000-00~1998-06
Organization NameUnit職務期間
KUASDepartment of Mechanical EngineeringProfessor0000-00~0000-00
Taiwan Power CompanyMechanical Engineer0000-00~0000-00